2
For technical questions call 1-800-665-8685
V 3.05
8474116
20 Gallon Pressure
Abrasive Blaster
SPECIFICATIONS
Type
Pressure Abrasive Blaster
Operating Pressure
60 to 125 PSI
Air Consumption
6 to 25 CFM
Media Capacity
20 gallons
Features
5 in. rubber wheels for ease of portability
8 ft. hose length
Includes 2, 2.5, 3 and 3.5 mm nozzles
Applications
Can be used with most types of blasting abrasives to remove
paint, scale, rust or graffiti quickly and easily.
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator must follow basic
precautions to reduce the risk of personal injury and / or damage to the equipment. Before allowing someone
else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. Common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
NOTE:
Keep this manual for the safety warnings, precautions and operating, inspection and maintenance
instructions. When this manual refers to a part number, it refers to the included parts list.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean and well lit.
2. Do not use in the presence of flammable gases or liquids.
3. Keep anyone not wearing the appropriate safety equipment away from the work area.
NOTE:
Minimize distractions in the work environment. Distractions can cause you to lose control of
the tool.
4. Store tools properly in a safe and dry location to prevent rust or damage.
5. Always lock up tools and keep them out of the reach of children.
PERSONAL SAFETY
CAUTION! Wear protective equipment approved by the Canadian Standards Association (CSA) or American
National Standards Institute (ANSI) when using the tool.
1. Dress properly; wear protective equipment. Use breathing, ear, eye, face, foot, hand and head protection.
Always wear ANSI approved impact safety goggles, which must provide both frontal and side protection.
Protect your hands with suitable gloves. Wear a full face shield if your work creates metal filings or wood
chips. Protect your head from falling objects by wearing a hard hat. Wear an ANSI approved dust mask
