V1.0
Pneumatic/Manual Fluid Extractor
8381725
Visit www.princessauto.com for more information
3
INTRODUCTION
The Pneumatic/Manual Fluid Extractor is designed to extract fluids
pneumatically and manually from confined areas where the engine oil drain
plug is inaccessible. It is ideal for oil changes on boats, cars, motorcycles,
outdoor power equipment, industrial machinery, etc. It is also handy to
remove bilge water from boats, trapped water in plumbing systems, etc.
SAFETY
WARNING! Read and understand all instructions before using this tool. The
operator must follow basic precautions to reduce the risk of personal injury
and/or damage to the equipment.
Keep this manual for safety warnings, precautions, operating or inspection
and maintenance instructions.
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well-lit
and free of distractions. Place lights so you are not working in a shadow.
2. Keep anyone not wearing the appropriate safety equipment away from
the work area.
3.
Store unused tools properly in a safe and dry location to prevent rust
or damage. Lock tools away and keep out of the reach of children.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection
for the eyes. Eye protection equipment should comply with CSA Z94.3-07
or ANSI Z87.1 standards based on the type of work performed.
2. Wear gloves that provide protection based on the work materials or to
reduce the effects of tool vibration.
a.
Always wear fuel and oil-resistant gloves when working with
fluids.
3.
Wear protective clothing designed for the work environment and tool.
4.
The tool may contain high pressure. Use safety glasses and gloves for
protection during operation. Keep hands clear of the exposed rubber
portions of the hose.
