5 Ton Longstroke Bottle Jack
5
Visit www.princessauto.com for more information
8035896
V 2.9
MAINTENANCE
1. After operation, press the ram (#6) and the plunger (#24) down to keep them clean and to
prevent rusting.
2. If the ram rises automatically when it is pressed down, open the oil plug (#11) to bleed the air
out of the system.
3. To add oil, set the jack upright. Pull out the oil plug located on the side of the jack, and add oil
up to the level of the plug.
4. It is recommended to change the hydraulic oil at least once every 3 years.
CAUTION! Only qualified service personnel should repair the tool.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the steel parts to avoid rust.
Remove the lubricant before using the tool again.
DISPOSAL
Recycle a tool damaged beyond repair at the appropriate facility.
Contact your local municipality for a listing of disposal facilities or by-laws for electronic devices,
batteries, oil or other toxic liquids.
WARNING! DO NOT pollute the environment by allowing uncontrolled discharge of waste oil.
TROUBLESHOOTING
Contact Princess Auto Ltd. for a solution if the tool does not function properly or parts are missing. If
unable to do so, have a qualified technician service the tool.
