Power Fist 10 in. Bench-Top Drill Press, Руководство пользователя

Страница: 14 / 40

8654337 10 in. Bench-Top Drill Press V 4.0
3 An irregularly shaped workpiece may not lay flat on the table. Block and
clamp it securely as any tilting, twisting or shifting will create a rough drill
hole and may damage the drill bit or drill.
4. Turn the drill press on.
5. Pull down on the feed handle and slowly drill a hole into the workpiece.
6. Once the desired depth is reached, slowly push the feed handle up until the
drill bit clears the workpiece.
7. Turn the drill off. Remove or reposition the workpiece, once the drill bit
stops rotating.
CARE & MAINTENANCE
1. Maintain the tool with care. A tool in good condition is efficient, easier to
control and will have fewer problems.
2. Inspect the tool components periodically. Repair or replace damaged or
worn components. Only use identical replacement parts when servicing.
a. Examine belt for cracks, tears in the backing and other damage.
Replace damaged belts by following the instructions to install and
tension under Operation - Changing Drill Speed .
3. Follow instructions for lubricating and changing accessories.
4. Only use accessories intended for use with this tool.
5. Keep the tool handles clean, dry and free from oil/grease at all times.
6. Maintain the tool’s labels and name plates. These carry important information.
If unreadable or missing, contact Princess Auto Ltd. for replacements.
WARNING! Only qualified service personnel should repair the tool. An
improperly repaired tool may present a hazard to the user and/or others.
CLEANING
1. Clean the external surfaces with a cloth after use.
2. Check that all air vents are unblocked.
3. Blow out the motor of accumulated sawdust with compressed air.
14 For technical questions call 1-800-665-8685