Power Electronics SD750K, Руководство по аппаратному обеспечению и установке

Страница: 36 / 100

SD750K POWER ELECTRONICS
34
RECEPTION, HANDLING AND TRANSPORTATION
EN
To unpack, if necessary, unscrew the screws that fix the cardboard or wooden box to the pallet. Then,
unscrew the fixing screws on the angle brackets. To lift the drive and place it in a vertical position, use
only a crane or a forklift equipped with straps or slings. Lift gently by pulling the top bolts.
To rise to an upright position, use only a crane or forklift equipped with belts or slings. Lift it carefully
pulling from the top eyebolts.
Avoid sudden movements and blows during transportation. When placing the equipment on the ground,
stop the lowering movement just before contacting the ground, and after this, lower it very slowly to avoid
shocks.
During handling and transportation, the goods should not be exposed to moisture, overturned, inverted,
tilted or impacted. The tilting angle should be no more than 30º.
In case of doubt about how to manipulate and transport equipment composed by several modules,
consult Power Electronics.