Power Electronics SD750K, Руководство по аппаратному обеспечению и установке

Страница: 24 / 100

SD750K POWER ELECTRONICS
22
TECHNICAL CHARACTERISTICS
EN
HARDWARE
Digital inputs 6 programmable, Active high (24Vdc). Isolated power supply
Digital outputs 3 programmable changeover relays (250Vac, 8A or 30Vdc, 8A)
Analogue input
3 programmable differential inputs: 0 – 20mA, 4 – 20mA, 0 – 10Vdc and ±10Vdc,
PT100 (optically isolated)
Analogue outputs 2 isolated programmable outputs: 0 – 20mA, 4 – 20mA, 0 – 10Vdc and ±10Vdc
Encoder inputs (optional) 1 differential encoder input. Voltage inputs from 5 to 24Vdc
User power supply
+24Vdc user power supply (Max 180mA) regulated and short-circuit protected
+10Vdc user power supply (Max 2 potentiometers R= 1 k

) regulated and short-
circuit protected
I/O Extension board
(optional)
Digital I/O board:
5 Digital Inputs: Programmable inputs and active high (24Vdc). Optically solated.
5 Digital Outputs: programmable multi-function relays.
Analogue I/O board:
2 Analogue Inputs: Programmable and differential input.
2 Analogue Outputs: Programmable outputs in voltage / current.
External power supply (optional) 24V External Power Supply
COMMUNICATION
Standard hardware
USB port
RS485 port
Ethernet
Optional hardware
Optical fiber
Communication Cards
Standard protocol
Modbus-RTU
Ethernet (Modbus TCP)
Optional protocol
Profibus-DP
Ethernet IP
CAN Open
ProfiNet
CONTROL PANEL
Type Removable
Length 3 meters (optional)
Connection USB
Visualization leds
LED RUN: Motor receiving power supply
LED FAULT: Flashing displays that a fault has occurred
LCD display
LCD screen
Keypad with 8 keys to control and configure the drive, start and stop / reset
Independent memory
WiFi communication module (optional)
Display information
Average current and 3-phase motor current
Average voltage and 3-phase motor voltage
Average input voltage and 3-phase input voltage
3-phase motor input and output frequency
DC Bus Voltage
Drive Status
Speed, Torque, Power, Power Factor of the motor
Register of total and partial drive running time with reset function (hours)
Register of total and partial drive energy consumption with reset function (kWh)
Relay status
Digital inputs / PTC status
Output comparator status
Analogue inputs and sensor values
Analogue outputs value
Motor overload and equipment status
Drive and rectifier temperature
Fault history (last 6 faults)
Others
Real time clock
Perpetual calendar