Powercraft
11
Never operate the axle locking button if the engine is still rotating.
Mounting the stand for the combitool
Fig. 4b
•
Mount the stand on the side of a workbench or worktop with a maximum thickness of 55
mm.
•
The height of the stand is adjustable. Loosen the top tube of the stand by turning it
anticlockwise. Draw the tube out to its maximum height and secure it by turning
the tube clockwise.
•
The height of the suspension bracket is adjustable by loosening the black knob. After
adjusting the suspension bracket to the correct height, retighten the knob.
•
Attach the Combitool to the suspension bracket of the stand; this suspension bracket can
be turned 360°.
Powercraft does not deliver spare accessories for the Combitool. The Combitool is designed
to use the standard accessories (with collet diameter 3,2 or 2,4 mm) of Dremel, Black &
Decker, Bosch or Proxxon. Always check that the maximum rpm of the accessory is suitable
for the maximum speed of the Combitool.
Some hints in regard to speed
Always practice on a piece of scrap to choose the correct accessory and the optimum
operational speed.
•
Use low speed (with respect to high temperatures) with plastics and other materials with a
low melting temperature.
•
Use low speed (with respect to damaging the brushes) during cleaning, polishing and
brushing.
•
Use high speed when working with steel or iron.
Tip for cutting:
Use paraffin or other suitable lubricant on the cutter to prevent the cut material
from adhering to the cutter teeth.
Grinding stones
When using a grinding stone the first time, use the dressing stone to balance it. The dressing
stone can also be used for cleaning the surface or to give the grinding stone
a special shape.
Material
Speed setting
Stone, shell
1
Steel 5
Aluminium, brass
2
Plastic 1
4. ACCESSORIES FOR THE COMBITOOL
06
Powercraft
COMBITOOL PKW-160N
Carefully read this manual before using the machine. Make sure that you know how
the machine functions and how to operate it. Maintain the machine in accordance
with the instructions to make sure it functions properly. Keep this manual and the
enclosed documentation with the machine.
Intended use
This appliance is developed for DIY-use and can be used e.g. for drilling small holes in wood or
synthetic materials, engraving of glass, grinding of bolts, polishing smooth surfaces etc.
Contents:
1. Machine data
2. Safety instructions
3. Assembly and operation
4. Accessories for the combitool
5. Maintenance
Technical specification
The package contains:
1 Combitool
1 Flexible
shaft
1 Stand
1 Collet
spanner
40 Accessories
1 Tile cutting set
1 Tile cutter
1 Case
1 Users
manual
1 Guarantee
card
Check the machine, loose parts and accessories for transport damage.
Voltage
230 V~
Frequency
50 Hz
Power input
160 W
No load speed/min
5000 - 35000
Capacity of collet
3.2 + 2.4 mm
Weight
0.66 kg
Lpa(sound pressure)
72.4 dB(A)
Lwa(sound power)
85.4 dB(A)
Vibration value
1.33 m/s
2
1. MACHINE DATA
UK
UK