Power Craft 54849, Инструкция по эксплуатации

Страница: 22 / 28

22
ENGLISH
INSTRUCTION MANUAL
Troubleshooting
Problem Possible cause Possible solution
Air leaking from regulator Regulator membrane defective Replace regulator
Pressure on manometer falling
slowly Regulator valve seating dirty or
worn Replace regulator
Lid leaking liquid or air Lid seal defective
Screw clamps not tightened
properly Replace lid seal
Tighten screw clamps
Paint in tank separates Paint not mixed or thinned
correctly Mix paint thoroughly and
check it is thinned in
accordance with
manufacturer’s instructions
Manometer does not show
pressure Defective manometer Replace manometer
Safety valve leaking air Pressure in tank too high
Defective safety valve Reduce tank pressure to 20-50
PSI
Replace safety valve
immediately