UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
14
Model Number: PKB-1050/2
Operation
Setting the operating mode (Fig. A)
Do not change the operating mode during use.
• Set the switch (6) to position ”A” for drilling.
• Set the switch (6) to position ”B” for hammer drilling.
Hints for optimum use
• Clamp the workpiece.
• Firmly hold the machine with both hands.
• Place the drill bit on the workpiece.
• Switch on the machine.
• Do not apply too much pressure on the machine. Let the machine do the
work.
• Switch off the machine and wait for the machine to come to a complete
standstill before putting the machine down.
