SYMPTOM
POSSIBLE CAUSE
SOLUTION
LID DOES NOT LOCK
The sealing ring is not properly installed
Re-install the sealing ring
CANNOT OPEN THE LID AFTER
ALL PRESSURE IS RELEASED
The float valve is still up
Make sure there's no pressure on the unit
AIR ESCAPES FROM THE RIM
OF THE LID
No sealing ring was installed
Food residue is on the sealing ring
Sealing ring is damaged or worn out
Install the sealing ring
Clean the sealing ring
Replace the sealing ring
AIR ESCAPES FROM THE FLOAT
VALVE DURING COOKING
Food is stuck on the sealing ring of the float valve
Clean the sealing ring
THE FLOAT WILL NOT RISE
The sealing ring of the float valve is worn out
Replace sealing ring
The pressure limit valve is not placed properly
Adjust the pressure limit valve to “Close” position
Not enough food or water
Check recipe for proper quantities
Air escaping from the rim of the lid
& the pressure limit valve
Call our customer service center
THE UNIT TURNS OFF
The unit overheated
Unplug & let the unit cool for 30 min to reset
BEEPING SOUND & DISPLAY
READS "LID
Lid may be in the incorrect position
Make sure lid is positioned correctly
INDICATOR CODE
PROBLEMS/CAUSES
E1
Circuit open of sensor
E2
Short circuit of sensor
E3
Overheating
E4
Pressure switch malfunction
TROUBLE SHOOTING
DISPLAY ERROR INDICATOR
10-QUART POWER COOKER™ MODEL:PC-WAL4 |
15
Содержание PC-WAL4
Страница 2: ...2 10 QUART POWER COOKER MODEL PC WAL4 ...