manualshive.com logo in svg

Poulan Pro Pro 925 ZX, Pro 950 ZX, Руководство оператора

Поделиться
Скачать
Poulan Pro Pro 925 ZX, Pro 950 ZX Скачать руководство пользователя страница 32

English-

30

OPERATION

Turning on the spot can be achieved by 
moving one control backward (behind 
the neutral position) and carefully moving 
the other steering control forward from its 
neutral position. 

Operating on hills

Read the Safety Instructions "Slope 
Operation" in the "Safety Instructions".

•

The slowest speed possible should be 
used before starting up or down hills.

•

Avoid stopping or changing speed on 
hills.

•

If stopping is absolutely necessary, pull 
drive levers into the neutral position and 
push to the outside of the unit and 
engage the parking brake.

•

To restart movement, release the parking 
brake.

•

Pull the control levers back to the center 
of the mower and press forward to regain 
forward motion.

•

Make all turns slowly.

WARNING!
To prevent rolling, never drive 
the machine on ground with a 
slope of more than 10 degrees. 
Mow slopes upwards and 
downwards, never across. 
Avoid sudden changes in 
direction.

8011-755

Stopping conditions

IMPORTANT INFORMATION
Control levers return to neutral when 
released. This may cause the mower to 
suddenly stop.

8011-481

Released parking brake

10 dgrees

10

Содержание Pro 925 ZX, Pro 950 ZX

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды