8
Hinge bracket
Formed tabs
Rear door
Grass
catcher
frame
Handle bracket hooks
Rear
door
Grass
catcher
handle
Catcher
frame side hook
ASSEMBLY
“FABRIC TOP” GRASS CATCHERS
ASSEMBLE/ATTACH GRASS CATCH ER
• Put grass catcher frame into grass bag
with rigid part of bag on the bottom.
• Slip vinyl bindings over frame.
NOTE
: If vinyl bindings are too stiff, hold
them in warm water for a few minutes. If
bag gets wet, let it dry before using.
• Lift the rear door on the mower housing.
• For HINGE BRACKET mounted catcher,
place the grass catch er frame onto the
formed tabs on the rear door hinge
bracket.
• For HANDLE BRACKET mounted
catcher, place frame side hooks into
slots in handle brackets.
Rear door slots
Grass
catcher
han dle
Catcher frame hook
Pivot pins
Grass
catcher
handle
Catcher
frame hook
Rear
door
• For DOOR PIVOT PIN mounted catcher,
place the grass catcher frame hooks
onto the door pivot pins.
• For DOOR SLOT mounted catcher,
place the grass catcher frame hooks
into the slots of the rear door.
NOTE:
The grass catcher is secured to the
lawn mower housing when the rear door is
lowered onto the grass catcher frame.
ALL GRASS CATCHERS
CAUTION:
Under normal usage, the
catcher material is subject to de te ri o ra-
tion and wear and should, therefore, be
checked frequently for replacement. Any
replacement catcher should be checked
to ensure compliance with original man u-
fac tur er's spec i fi ca tions.
CAUTION:
Do not run lawn mower
with out the discharge deflector (rear
door), approved grass catcher, clipping
de flec tor or mulcher plate in place. Never
attempt to operate mower with the dis-
charge deflector (rear door) removed or
propped open.
SPARK PLUG BOOT
On some models a spark plug boot is
packed loose in the parts bag. If your
model has the boot, install on spark plug
wire and reconnect spark plug wire to
spark plug.
Spark plug
Boot
