Poulan Pro PR625Y22RHP, Руководство оператора

Страница: 10 / 36

10
Remote
throttle
control
FAST
SLOW
CHOKE
(START)
OPERATION
TO ADJUST CUTTING HEIGHT
ALL MODELS:
Adjust cutting height to suit your re quire-
ments. Me di um position is best for most
lawns. Raise wheels for low cut and lower
wheels for high cut.
NOTE : For shipping purposes, the rear
wheels on your lawn mower may not be
adjusted to the same position as the front
wheels. Before operating mower adjust all
wheels to the same cutting height.
“MANUAL” ADJUSTMENT
• Remove wheel, bolt, and hardware and
reassemble in desired adjustment hole.
• Reinstall wheel components in the same
order as they were before removal.
Tighten securely.
• Make sure all wheels are at same height.
“QUICK” ADJUSTMENT
• To change cutting height, squeeze adjuster
lever to ward wheel. Move wheel up or
down to suit your re quire ments. Be sure
all wheels are in the same setting.
NOTE: Adjuster is properly positioned when
plate tab inserts into hole in lever. Also,
9-position adjusters (if so equipped) allow
lever to be positioned between the plate tabs.
Bolt
Flat washer
Wheel
3/8-16
Locknut Spacer
LEVER BACKWARD TO
LOWER MOWER
LEVER FORWARD TO RAISE MOWER
Plate tab
Lever
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED CONTROL
MODELS WITH REMOTE THROTTLE
Engine speed is con trolled by the throttle
control located on the upper handle.
• Move lever forward to FAST engine
speed for start ing and better bagging.
• Move lever backward for SLOW engine
speed.
• Some models have engines equipped
with a choke feature. Move the lever all
the way forward to the CHOKE position
when starting a cold engine.
NOTE: Be sure engine START/STOP
switch (if equipped) is in the ON po si tion.
MODELS WITH FIXED SPEED ENGINES
Engine speed was set at the factory for
optimum per form ance. Engine speed is
not adjustable.
The operation of any lawn mower can result in foreign objects
thrown into the eyes, which can result in severe eye damage.
Always wear safety glasses or eye shields while operating your
lawn mower or performing any adjustments or repairs. We recom-
mend standard safety glasses or a wide vision safety mask over spectacles.
Use ear
p r o t e c -
tors to
a v o i d
damage to hearing.