Poulan Pro PR18530ES Скачать руководство пользователя страница 5

Страница: 5 / 44

ASSEMBLY / PRE-OPERATION

HOW TO SET UP YOUR SNOW THROWER

TOOL BOX (See Fig. 10)

A toolbox is provided on your snow thrower. The toolbox is

located on top of the belt cover. Store the extra shear bolts,

nuts and multi-wrench provided in parts bag in the toolbox.

NOTE:

The multi-wrench may be used for assembly of the

chute rotator head to snow thrower and making ad just ments

to the skid plates.

UNFOLD UPPER HANDLE

1. Raise upper handle to the operating position and

tight en handle knobs securely. Additional carriage

bolts, washers and handle knobs are in bag of parts.

Use to secure upper handle to lower handle. Install

in lower holes in handles.

INSTALL SPEED CONTROL ROD (See Figs. 1 and 2)

1. Remove plastic tie securing rod to lower handle.
2. Insert rod into speed control bracket and secure with

retainer spring.

SPEED CON TROL ROD

SPEED

CONTROL

BRACKET

RETAINER

SPRING

SPEED

CONTROL

LEVER

FIG. 2

SPEED

CONTROL

ROD

HANDLE

KNOB

LOWER

HANDLE

PLASTIC TIE

UPPER

HANDLE

FIG. 1

INSTALL TRACTION DRIVE CONTROL ROD

(See Figs. 3 and 4)

The traction drive control rod is installed on the snow thrower.
1. Remove plastic tie securing traction drive control rod

to rotator bracket.

2. With top end of rod positioned under left side of control

panel, push rod down and insert top end of rod into

hole in traction drive control lever. Snap rod into place

by pushing down.

NOTE:

Engage lever once and rod should snap into place.

FIG. 4

TRACTION DRIVE CON TROL LEVER

TRACTION DRIVE

CON TROL ROD

TRACTION DRIVE

CONTROL ROD

FIG. 3

PLASTIC TIE

Содержание PR18530ES













































Результаты поиска

Содержание PR18530ES

Отзывы:

Похожие инструкции для PR18530ES

Бренды по названию

Популярные бренды

Poulan Pro PR18530ES, Руководство пользователя

Результаты поиска

Содержание PR18530ES

Отзывы:

Похожие инструкции для PR18530ES

Бренды по названию

Популярные бренды