background image

9

02829

OPERATION

KNOW YOUR TRACTOR

READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR

Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and ad just ments.  

Save this manual for future reference.

ATTACHMENT CLUTCH LEVER

 - Used to engage the 

mower blades, or other attachments mounted to your 

tractor.

ATTACHMENT LIFT LEVER

 - Used to raise, lower, and 

adjust the mower deck or other attachments mounted to 

your tractor.

CLUTCH/BRAKE PEDAL

 - Used for declutching and brak-

 ing the tractor and starting the engine.

GEARSHIFT  LEVER 

- Selects the speed and di rec tion 

of the tractor.

IGNITION SWITCH

 - Used for starting and stopping the 

engine.

Our tractors conform to the safety standards of the American National Standards Institute. 

Fig. 4

PARKING 

BRAKE

CLUTCH/BRAKE

PEDAL

THROTTLE/CHOKE

CONTROL

GEAR SHIFT

LEVER

ATTACHMENT 

LIFT LEVER

LIFT LEVER 

PLUNGER

IGNITION

SWITCH

ATTACHMENT 

CLUTCH LEVER

ROS "ON" 

POSITION

HEIGHT 

ADJUSTMENT 

INDICATOR

LIGHT SWITCH

LIFT LEVER PLUNGER

 - Used to release attachment lift 

lever when changing its position.  

LIGHT SWITCH

 - Turns the headlights on and off.

PARKING BRAKE

 - Locks clutch/brake pedal into the 

brake position.

REVERSE OPERATION SYSTEM (ROS) “ON”  POSI-

TION -

 Allows operation of mower deck or other powered 

attachment while in reverse.

THROTTLE/CHOKE CONTROL

 - Used for starting and 

con trol ling engine speed.

Содержание 438511





























Отзывы: