Poulan Pro 186914 Скачать руководство пользователя

Страница: 48 / 48

Your POULAN PRO product has been expertly en gi neered and carefully manu fac tured to rigid quality stan dards. As

with all mechanical products, some adjustments or part replacement may be necessary during the life of your unit.

FOR SERVICE OR REPLACEMENT PARTS:

1. Consult your dealer/place of purchase.

2. Consult the yellow pages of your phone directory for the name of the nearest service dealer (under “saws” for

Chain Saws or under “lawn mowers” for Trimmers, Brushcutters, and Blowers).

3. For replacement parts, have available the following information:

a. Model Number/Manufacturer's I.D. Number.

b. Description of part.

NOTE:

Electrolux Home Products provides parts and service through its au thor ized dis tribu tors and dealers;

there fore, all requests for parts and service should be directed to your local dealer(s). The phi loso phy of

Electrolux Home Products is to con tinu ally improve all of its prod ucts. If the operating characteristics

or the appearance of your product differs from those described in this Manual, please contact your local

local dealer for updated in for ma tion and as sis tance.

PARTS AND SERVICE

Содержание 186914

















































Результаты поиска

Содержание 186914

Отзывы:

Похожие инструкции для 186914

Бренды по названию

Популярные бренды

Poulan Pro 186914, Руководство пользователя

Результаты поиска

Содержание 186914

Отзывы:

Похожие инструкции для 186914

Бренды по названию

Популярные бренды