manualshive.com logo in svg

Poulan Pro 186914, Руководство пользователя

Представляем вам Poulan Pro 186914 - удобный и мощный инструмент для вашего двора. Не забудьте загрузить руководство пользователя с manualshive.com, чтобы быть в курсе всех функций и инструкций по эксплуатации. Скачайте бесплатно свое Owner's Manual сейчас и наслаждайтесь эффективной работой вашего Poulan Pro 186914!

Поделиться
Скачать
background image

25

TROUBLESHOOTING POINTS

Will not start

                            1.    Out of fuel.                                                                       1.    Fill fuel tank.

                                                  2.    Engine not “CHOKED” properly.                                      2.    See “TO START ENGINE” in Operation section.
                                                  3.    Engine fl ooded.                                                                3.    Wait several minutes before attempting to start.
                                                  4.    Bad spark plug.                                                               4.    Replace spark plug.
                                                  5.    Dirty air fi lter.                                                                   5.    Clean/replace air fi lter.
                                                  6.    Dirty fuel fi lter.                                                                  6.    Replace fuel fi lter.
                                                  7.    Water in fuel.                                                                    7.    Empty fuel tank and carburetor, refi ll tank with fresh  
                                                                                                                                                        gasoline and replace fuel fi lter.
                                                  8.    Loose or damaged wiring.                                               8.    Check all wiring.
                                                  9.    Carburetor out of adjustment.                                          9.    See “To Adjust Carburetor” in Service Adjustments  
                                                                                                                                                        section.
                                                10.    Engine valves out of adjustment.                                   10.    Contact an authorized service center/department.
                                                    

Hard to start

                            1.    Dirty air fi lter.                                                                   1.    Clean/replace air fi lter.

                                                  2.    Bad spark plug.                                                               2.    Replace spark plug.
                                                  3.    Weak or dead battery.                                                      3.    Recharge or replace battery.
                                                  4.    Dirty fuel fi lter.                                                                  4.    Replace fuel fi lter.
                                                  5.    Stale or dirty fuel.                                                            5.    Empty fuel tank and refi ll tank with fresh, clean gasoline.
                                                  6.    Loose or damaged wiring.                                               6.    Check all wiring.
                                                  7.    Carburetor out of adjustment.                                          7.    See “To Adjust Carburetor” in Service Adjustments  
                                                                                                                                                        section.
                                                  8.    Engine valves out of adjustment.                                     8.    Contact an authorized service center/department.

Engine will not turn over

        1.    Brake pedal not depressed.                                             1.    Depress brake pedal.

                                                  2.    Attachment clutch is engaged.                                        2.    Disengage attachment clutch.
                                                  3.    Weak or dead battery.                                                      3.    Recharge or replace battery.
                                                  4.    Blown fuse.                                                                      4.    Replace fuse.
                                                  5.    Corroded battery terminals.                                             5.    Clean battery terminals.
                                                  6.    Loose or damaged wiring.                                               6.    Check all wiring.
                                                  7.    Faulty ignition switch.                                                       7.    Check/replace ignition switch.
                                                  8.    Faulty solenoid or starter.                                                8.    Check/replace solenoid or starter.
                                                  9.    Faulty operator presence switch(es).                               9.    Contact an authorized service center/department.

Engine clicks but will not 

      1.    Weak or dead battery.                                                      1.    Recharge or replace battery.

start

                                          2.    Corroded battery terminals.                                             2.    Clean battery terminals.

                                                  3.    Loose or damaged wiring.                                               3.    Check all wiring.
                                                  4.    Faulty solenoid or starter.                                                4.    Check/replace solenoid or starter.

Loss of power                         

1.    Cutting too much grass/too fast.                                      1.    Raise cutting height/reduce speed.

                                                  2.    Throttle in “CHOKE” position.                                          2.    Adjust throttle control.
                                                  3.    Build-up of grass, leaves and trash under mower.           3.    Clean underside of mower housing.
                                                  4.    Dirty air fi lter.                                                                   4.    Clean/replace air fi lter.
                                                  5.    Low oil level/dirty oil.                                                        5.    Check oil level/change oil.
                                                  6.    Faulty spark plug.                                                            6.    Clean and regap or change spark plug.
                                                  7.    Dirty fuel fi lter.                                                                  7.    Replace fuel fi lter.
                                                  8.    Stale or dirty fuel.                                                            8.    Empty fuel tank and refi ll tank with fresh, clean gasoline.
                                                  9.    Water in fuel.                                                                    9.    Empty fuel tank and carburetor, refi ll tank with fresh  
                                                                                                                                                        gasoline and replace fuel fi lter.
                                                10.    Spark plug wire loose.                                                   10.    Connect and tighten spark plug wire.
                                                11.    Dirty engine air screen/fi ns.                                           11.    Clean engine air screen/fi ns.
                                                12.    Dirty/clogged muffl er.                                                     12.    Clean/replace muffl er.
                                                13.    Loose or damaged wiring.                                             13.    Check all wiring.
                                                14.    Carburetor out of adjustment.                                        14.    See “To Adjust Carburetor” in Service Adjustments  
                                                                                                                                                        section.
                                                15.    Engine valves out of adjustment.                                   15.    Contact an authorized service center/department.

Excessive vibration

                1.    Worn, bent or loose blade.                                               1.    Replace blade.  Tighten blade bolt.

                                                  2.    Bent blade mandrel.                                                        2.    Replace blade mandrel.
                                                  3.    Loose/damaged part(s).                                                  3.    Tighten loose part(s).  Replace damaged parts.

PROBLEM 

             CAUSE 

 

 

 

 

 

CORRECTION 

Содержание 186914

















































Отзывы:

Нет отзывов

Похожие инструкции для 186914

Yard Machines 370 Series Operator'S Manual preview
370 Series
Бренд: Yard Machines Страницы: 32
Yard Pro YP21KH42 (96041031300) Repair Parts Manual preview
YP21KH42 (96041031300)
Бренд: Yard Pro Страницы: 20
Texas WLA 53 TR/W User Manual preview
WLA 53 TR/W
Бренд: Texas Страницы: 16
Toro 30710 Groundsmaster 300 Operator'S Manual preview
30710 Groundsmaster 300
Бренд: Toro Страницы: 20
RHINO 00759048P Parts Manual preview
00759048P
Бренд: RHINO Страницы: 41
Wolf Garten Picco 32 E Instruction Manual preview
Picco 32 E
Бренд: Wolf Garten Страницы: 28
RedMax RWRH21 Operator'S Manual preview
RWRH21
Бренд: RedMax Страницы: 28
Skil 0140 Original Instructions Manual preview
0140
Бренд: Skil Страницы: 106
Sears Craftsman 944.601181 Owner'S Manual preview
Craftsman 944.601181
Бренд: Sears Страницы: 52
Peco PRO2B+ 28120901 Operator'S Manual preview
PRO2B+ 28120901
Бренд: Peco Страницы: 24
AL-KO E-Rider R85.1 Li Translation Of The Original Instructions For Use preview
E-Rider R85.1 Li
Бренд: AL-KO Страницы: 196
Swisher PREDATOR TALON WBRC11524C Owner'S Manual preview
PREDATOR TALON WBRC11524C
Бренд: Swisher Страницы: 16
Garland GRASS 1065 ZSH Instruction Manual preview
GRASS 1065 ZSH
Бренд: Garland Страницы: 172
MTD 110-112A Owner'S Manual preview
110-112A
Бренд: MTD Страницы: 14
QGarden QG39-130 Instruction Manual preview
QG39-130
Бренд: QGarden Страницы: 36
Sears 917.25170 Owner'S Manual preview
917.25170
Бренд: Sears Страницы: 32
TYM T194 Manual preview
T194
Бренд: TYM Страницы: 169
Cub Cadet TANK LZ 48 Limited Warranty preview
TANK LZ 48
Бренд: Cub Cadet Страницы: 1

Бренды по названию

Популярные бренды

Загрузить еще бренды