0200-GB INBETRIEBN_385
- 13 -
GB
STARTING WORK
After any contact with foreign objects
• Check the condition of knives and the knife holder.
• Retighten all knife screw fittings.
5. Stay clear while engine is running.
- Keep people out of the danger zone - foreign bodies which can
be ejected by the mower could injure them.
Special care is necessary on or near stony ground.
6. Wear hearing protection
The noise level in the workplace can deviate from
the measured value (see Technical Data) partly
because of the differing cabin types of various
tractors.
• If a noise level of 85 dB (A) is reached or exceeded,
the farmer must have suitable hearing protection in readiness
(UVV 1.1 §2).
• If a noise level of 90 dB (A) is reached or exceeded, the hearing
protection must be worn (UVV 1.1 § 16).
Turning manoeuvre when mowing
The cutter bar can be raised hydraulically (22°).
- The drive must not be turned off to do this.
- The lifting gear's (H1) position does not need to be altered
when turning.
Attention!
Do not enter the mower unit area as long as the
drive is running.
Important points before starting work
Safety hints:
see supplement-A Pkt. 1. - 7.)
After the first hours of operation
• Retighten all knife screw fittings.
Safety hints
1. Check
- Check the condition of knives and the knife holder.
- Check cutting drums for damage (see also chapter
"Maintenance").
2. Switch-on the machine only in working position and
do not exceed the prescribed power take-off speed (for
example max. 540 rpm).
A transfer, which is located near the gear, advises which p.t.o.
speed your mower unit is equipped for.
• Turn the p.t.o. on only when all safety devices (coverings, protective
aprons, casings, etc.) are in proper condition and attached to the
implement in the correct protective positions.
3. Pay attention to correct p.t.o. direction of
rotation!
4. Damage protection!
• The surface to be mowed must be free of obstructions or foreign
objects. Such objects (e.g. large stones, pieces of wood, boundary
stones, etc.) can damage the mower unit.
In the event of a collision
• Stop immediately and switch off the drive.
• Carefully check the implement for damage. The mowing discs
and their drive shaft must be checked in particulare (4a).
• Have the implement checked also by a specialist workshop if
necessary.
bsb 447 410
5 4 0 U p m
1 0 0 0 U p m
TD8/95/6a
TD 18/96/1
4a