Pottinger CAT 230 plus Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 39

Pottinger CAT 230 plus Скачать руководство пользователя страница 22

- 22 -

9900_GB-ANFAHRSICHERUNG_331

GB

Anti-hindrance safety device:

When moving around trees, fences, boundary stones etc.,
collisions between the cutter bar and obstacles can occur
despite careful and slow driving techniques. Therefore,in
order to prevent such damage, collision protection has
been planned for the cutting device.

Attention!

It is not the intention of the collision protection to prevent
damage to the machine when working at full speed.

Anti-hindrance safety device:

If the mower encounters an obstacle the springloaded
safety device (pos.1) is tripped and the cutter bar can
swing back. In this case stop immediately and reverse a
short distance it returns to working positions.

Positioning:

In case the safety device trips to easy adjust hex.
hd.nut.

Initial spring tension should be approx.:

- 118 mm (without Conditioner)

- 116 mm (with Conditioner)

IF YOU ARE NOT SURE WHETHER THE CUTTING
AREA IS REALLY FREE OF OBSTACLES, PLEASE
WORK AT AN APPROPRIATELY SLOW SPEED!

ANTI-HINDRANCE SAFETY DEVICE

«
...
20
21
22
23
24
...
»

Содержание CAT 230 plus








































Отзывы:

Нет отзывов