CLASSIC WIDE SINGLE CONSOLE
3/8
Step 1:
Carefully position the marble countertop (B) upside down on foam or soft padding to protect the surface. Position the basin (A) by
placing over the marble top cutout. Remove top washer and nut from anchor (#E). Carefully set the threadless anchor end into the
predrilled holes at backside of countertop.
Step 2:
Place the L shape brackets (# F), top washer and nut in succession through the other end of anchor. Secure by tightening the nut
with a wrench.
Note: position the basin (A) squarely under the cutout before fixing L shape brackets tightly, don’t tighten the brackets at this
stage.
Apply a continuous bead of high quality silicone or acrylic based bath sealant to the basin rim where it will contact the countertop
DO NOT USE PLUMBERS PUTTY OR ANY OIL BASED SEALANT AS THIS WILL STAIN THE MARBLE .Note: Don’t use adhesives
or adhesive sealants.
Draw the basin rim up to the countertop until it is snug.
CAUTION: TO AVOID BREAKAGE, DON’T OVER-TIGHTEN WITH WRENCH.
Immediately wipe away any excessive sealant.
