CLASSIC WIDE SINGLE CONSOLE
2/8
PROFESSIONAL INSTALLATION REQUIRED- Contractor and Plumber needed for Installation
Important Note: Please read all instructions carefully and completely before beginning assembly.
Pre-Installation:
•
Remove all parts and hardware from boxes along with any protective packaging. Identify each part and each piece of
hardware included. Do not discard any contents until after installation is complete to avoid accidentally discarding small
parts or hardware. Keep all parts out of the reach of children.
•
A standard 8” spread faucet should be used with this Marble top console.
Note: The Marble top is fragile. In order to preserve its integrity, it is important to limit the amount of handling it gets. Due to the
nature of this natural material, slight chipping or cracking may result with excessive handling or if placed on a hard surface.
The Marble top, even when it is still packed, should never lie flat, except for when it is placed on top of the console or during
unpacking. Please note that arrows on the package indicate the side to be placed up while storing.
Marble should be unpacked with extreme care. Once unpacked, the marble top should be placed directly on top of the console.
If placing down, marble top should only be placed on its end and on a very soft, cushioned surface such as a rug or thick toweling.
Note: Consoles usually need to be leveled and mounted to both wall and floor. Some hardware items needed for proper assembly
and installation are not included: ex. shim, spacer, high quality silicone or acrylic based bath sealant, etc. DO NOT USE
PLUMBERS PUTTY OR ANY OIL BASED SEALANT AS THIS WILL STAIN THE MARBLE . Note: Some cutting and drilling may be
necessary to mount console base to wall or to shape shelves for undersink hardware or plumbing.
Parts Included:
A. Basin (1pc) B. Marble countertop (1pc) C. Back splash(1pc) D. Console base (1pc)
Hardware Included:
E. Anchor (4pcs) F . L shape bracket (4pcs)
Tools Required (Not included):
Flat Head Screwdriver Open wrench
