Page 9 of 11
4) Once the toggles (N) are installed into the wall at the marked locations, reposition the APOTHECARY
SINK so that the holes of brackets (P) are aligning with the toggles.
5) Use a screwdriver to secure a provided Toggle Screw (O) into each hole of the bracket (P) and into either
an awaiting installed toggle, or directly into the wall if the hole aligns with a wall stud. Rotate each Toggle
Screw (O)
clockwise until tight.
9.
Slight adjust the position of base, and then secure the basin tightly.
10. There are pre-drilled holes on the marble countertop (I), side splash (F&G). Use high quality silicone or acrylic
based bath sealant to install side splash (F&G), back splash (H) by rust proof dowel (T) orderly, clean up any
excess immediately with a clean damp rag.
DO NOT USE PLUMBERS PUTTY OR ANY OIL BASED
SEALANT AS THIS WILL STAIN THE MARBLE
. Wipe off any excess wax or residue that may have
accumulated around sink area.
Avoid moving the top after it has been set into place. Allow the top to dry a minimum of 24 hours to allow for
proper adhesion to the console.
Caution: For safe handling, always handle the
metal tube carefully when removing the
apothecary sink!
O
Marble
Countertop
Wall
Caution: Do not allow
children to stand on
lower shelf.
I
H
F
G
T
T
T
T
