Page 6 of 11
3.
Carefully position the marble countertop (I) upside down on foam or soft padding to protect the surface. Attach
brackets (P) to marble countertop (I) using bolts (Q), spring washers (R) and flat washers (S) as shown. Tighten
by hand at first. Securely tighten the bolts with Allen wrench (U).
4.
Position the basin (K) by placing over the marble top cutout. Remove top washer and nut from anchor (L).
Carefully set the threadless anchor end into the predrilled holes at backside of countertop.
Hold
flat
head
screw
driver
stationary
with
moderate
downward
force.
This
nut
is
used
to
prevent
damaging
the
bolt.
After
installation,
remove
nut
and
follow
step
5.
Use
open
wrench
to
tighten
nut
to
set
anchor
in
place.
Marble
Top
K
I
L
Q
R
S
P
I
U
