background image

Natural Gas

Potterton Gold 24 HE

G.C.N

o

47 590 05

Potterton Gold 28 HE

G.C.N

o

47 590 06

Potterton Gold 33 HE

G.C.N

o

47 590 19

2

Publication No. 5116283

Dear User

Thank you for choosing a Potterton Combination boiler. The
following instructions are simple basic steps that you can take to
ensure years of trouble free heating and hot water for your home.

Points to note

This is a gas fired, room sealed, powered flue condensing
combination boiler, providing central heating for your home and
mains fed domestic hot water to taps and  shower. It is fully
automatic and does not have a pilot light. 

Priority is given to the hot water mode - when a hot water tap is
turned on the supply of heat to the central heating circuit is
interrupted.

The energy efficiency of your new boiler means that water vapour
condenses inside the boiler itself. This water is taken away from
the boiler to a suitable drain.

At times of low outside temperature a white plume can be seen at
the boiler flue terminal on the outside of your house. This is
mainly water vapour due to your boiler condensing and is normal.

Warranty

heateam

the service division of Baxi Potterton provide a 3 year

free warranty for your peace of mind. Once your boiler is
registered with us and in the unlikely event your boiler develops a
fault and your installer is unable to assist, 

heateam

will provide a

free service to you provided the boiler is 

under 3 years old

.

Otherwise 

heateam

will offer a competitive fixed price repair rate

including parts, labour and VAT. To arrange an engineer visit
either in warranty or out, please call 

heateam

on 

08706 017 017

.

It would help if you had your boiler serial number when you call,
the serial number is shown on the back cover of this guide.

Annual Service

To ensure you receive the maximum efficiency from your boiler
we recommend your boiler has an annual service so you and
your family can continue to enjoy heating and hot water comfort.
To arrange an annual service from one of our Baxi Potterton
heating experts, please call 

heateam

on 

08706 017 017

to

arrange a visit convenient to you.

Benchmark Commissioning Check List

Please ensure that your installer hands you the boiler Installation
& Service Instructions with the “Benchmark” Commissioning
Checklist sections completed. The details in the Checklist will be
required in the event of any warranty work. Keep the instructions
in a safe place and ensure that the Service Interval Record at the
back is completed at each service visit.

3 Years Free Warranty 

- register today

To receive your 3 years free warranty please
complete the form supplied with the boiler or
simply call 

heateam

, the service division of

Baxi Potterton on 

08706 017 017

.

Содержание Gold Combi HE













Отзывы: