background image

26

INS-2500 • 5403680 • REV C •  04/19

Potter's IntelliGen

 Controller is designed to provide you with live status updates of your nitrogen generator. The IntelliGen

 

Nitrogen Generator needs to be wired using a CAT-5 Ethernet cable. The Ethernet port is located on the bottom left of the 

IntelliGen

 Controller. When the unit is wired and powered on, data will be accessible at www.PotterIntelliView.com.

Register your nitrogen generator, visit www.PotterIntelliView.com.
1.  Log In or Register New User.
2.  If you are a new user you will be required to enter your name, company information, and a valid e-mail address.
3. 

You will receive an e-mail confirmation with an account verification link.

4.  Once logged in, click the "Register Generator" button on the Dashboard Overview page.
5.  Enter the unit’s MAC ID Number and the Serial Number which can be found on the IntelliGen

 Controller inside the cabinet. 

See Fig. 33.

IntelliView

 Dashboard Internet Connectivity

6.  Add a name for the generator and the building where the generator is located.
7.  A window will appear indicating that you have successfully added the nitrogen generator. Click save.
8.  The page will refresh with information on the new nitrogen generator.
9.  For more information on the Potter IntelliView

 Dashboard, watch a tutorial at 

www.potterintelliview.com

MAC ID

Serial Number

Fig. 33

Содержание Intelligen INS-2500


























































Отзывы: