background image

05

06

Drone Battery

Discarded lithium batteries can not be thrown in the trash, 

please contact the battery recycling center.

Disposal and Recycle of Lithium Battery

Charging by 

USB Adapter

 Charging by USB 
Ports of Computer

Charging by 

Car charger

Name of Parts

Blade

color

shell

Protect
cover

Motor

Transmitter

17

Charging Method of Li-Po Battery

Flyer warnings

It is recommended to select the output 5V2A current adapter, which will be faster for charging.

The maximum current can not exceed 5V, otherwise the battery could be damaged.

(

1

)

Confirm that the battery is fully charged.

(

2

)

Confirm that the left throttle is in the middle position before power on.

(

3

)

Before flight, please turn on the controller, first and then power on the drone. While 

after flight, power off the drone first and then turn off the controller. Incorrect steps may 

result in the drone out of control.

(4

)

Make sure the drone parts are connected strickly and securely. The continuous 

vibration during flight may loosen the connection between the drone parts which may 

result in hard control.

(

5

)

Incorrect operation may result in crashing and make the drone parts damaged/

f a u l t y. We s u g g e s t t h a t t h e u s e r s h o u l d p u r c h a s e t h e d r o n e p a r t s t o r e p l a c e 

immediately for sustainable flying. please feel free to contact us at 

[email protected] 

 We will be standing by all the time for you! 

Definition of the Flyer and the Controller

*

 Use Potensic original charger only.

*

 Check the charger wire, plug, fuselage and other components on a regular basis to 

make sure they are in good condition. If any of those parts damaged, please do not 

use them until they are repaired.

*

If not using the drone for over a week, please make sure that the power of the battery 

remains above 50% to keep its performance and utility.

1. Plug the USB charging cable to your computer USB interface, the light will indicate red.
2. Then connect it with the battery, the red light will off which indicates that the battery 
is being charged.
3. If the red light comes on again, then the battery is fully charged. Charging time is 
about 50 minutes.

Содержание F186 DH









Отзывы: