OBM-U170/U240
4K LCD Professional Monitor
with 12G-SDI, Quad Link 4K
6
3. Location and Function of Parts and Controls
Front Panel
A : Input select Bu ons/Lamp
Press to monitor the signal input to each connector.
[SINGLE] Bu on/Lamp
- Press the bu on to select SDI input or SFP input for one channel.
- Mode changes in the order of [12G SDI-1], [12G SDI-2], [3G SDI-3], [3G SDI-4], [SFP]*.
*When a SFP module is inserted, [SFP] input can be selected.
[2-S.I.] Bu on/Lamp
- Press the bu on to select 2-SAMPLE Interleave SDI input signal through two or four SDI inputconnectors.
- Mode changes in the order of [Dual-Link 2-S.I.], [Quad-Link 2-S.I.].
[SQUARE] Bu on/Lamp
- Press the bu on to select [Quad-Link Square Division] mode.
[HDMI] Bu on/Lamp
- Press the bu on to select HDMI input.
B : F1 ~ F5 Bu on/Lamp
Press to adjust or turn on/off the assigned func on.
The following func ons are assigned at the factory.
[F1]: Color Space Compare
[F2]: H/V Delay
[F3]: Color Temp
[F4]: Audio Level Meter
[F5]: Time Code
C : Func on Bu on/Lamp
Press to adjust or turn/off each func on.
[SCAN] Bu on
- Press the bu on to adjust the scan mode. (Zero Scan, 1:1 Scan).
[ASPECT] Bu on
- Press the bu on to select the Aspect Ra o of the signal.
- Mode changes in the order of [16:9] [4:3] [2.35;1] [1.85:1] [15:9] [16:10] [AUTO].
[MARKER] Bu on
- Press the bu on to ac vate and deac vate the Marker.
[BLUE ONLY] Bu on
- Press the bu on to ac vate and deac vate the Blue Only func on.
- You may remove R(red) and G(green) from the input signal and play the screen only with B(blue) signal.
This func on is convenient to adjust Chroma and Phase and to observe the signal noise.
- The bu on may be pressed twice to change the screen to MONO mode.
(This mode uses only Luminance value)
[KEY LOCK] Bu on
- Press the bu on to lock all bu ons except Power.
D : Rotary encoder
[BRIGHT] knob
Press this knob to display the adjustment screen and adjust the picture brightness. Press again to hide the
adjustment screen. Turn the knob right to increase the brightness and turn le to decrease it.
[CONTRAST] knob
Press this knob to display the adjustment screen and adjust the picture contrast. Press again to hide the
adjustment screen. Turn the knob right to increase the contrast and turn le to decrease it.
A
B
C
D
E
F
G
