![Postium OBM-P180 Скачать руководство пользователя страница 19](http://html1.mh-extra.com/html/postium/obm-p180/obm-p180_operational-instructions_1582744019.webp)
OBM-P Series
19
True Dual Monitoring Solutions
Picture By Picture
Page 6/7
Page 7/7
Closed Cap on
Selects [On] to display the Closed Cap on and
[Off] not to display.
Type
Sets the Closed Cap on type
[708]: Selects this mode to display 708 when
HD-SDI signal is input.
[608(VBI)]: Selects this mode to display 608(VBI)
when SD-SDI signal is input.
[608(708)]: Selects this mode to display 608(708)
when D-SDI signal is input.
708
Sets the Closed Cap on type for 708.
Selects from [Service1] to [Service6].
608
Sets the Closed Cap on type for 608(708) and
608(VBI). Selects from [CC1] to [CC4].
Factory Reset
Ini alizes OSD values to the factory default.
Internal Signal
Generates the White Pa ern internally.
The selectable range is from 100%(White) to
0%(Black).
Key LED
Sets On to turn on the LED of the keys, and sets
Off to turn off the LED of the keys.
OSD Time
Adjusts the display me of the OSD menu.
[10 Sec.]: The OSD menu will be disappeared
a er 10 seconds.
[20 Sec.]: The OSD menu will be disappeared
about 20 seconds.
[30 Sec.]: The OSD menu will be disappeared
about 30 seconds.
[On]: The OSD menu will not be disappeared.
OSD Posi on
Sets the posi on of OSD. Selects [Center] to
[Le Bo om].
System Data
-[Save to USB]
Saves the current se ngs of the monitor to the
USB memory.
-[Copy from USB]
Recalls the se ngs saved in the USB memory,
and load them to the monitor.
- Saves and adjusts the se ngs of User 1 of User
Preset.
Time Code
- Selects the type of the me code to be displayed.
[VITC]: To display the VITC me code
[LTC]: To display the LTC me code
Closed Cap on Se ng
Fast Mode Se ng
This func on allows the total latency to become
nearly the zero delay, from the receipt of the signal
to the on-screen display.
Fast Mode
Sets the fast mode.
System Se ng
Size
Sets the size of Waveform and Vector Scope.
[Large] and [Small] can be selected.
* The size of Waveform and Vector Scope is fixed
as Small in PBP Mode
WFM&Throughout w/ Camera log
The Waveform is displayed on the basis of the
image, which the Camera log is applied to. And,
the image, which the Camera log is applied to,
is output by the loop-through.
* This func on works with SDI-1 input and output.