Postium OBM-P180, Инструкции по эксплуатации

Страница: 18 / 32

OBM-P Series
18
True Dual Monitoring Solutions
Picture By Picture
Page 4/7
Marker
- Selects On to display the marker, and Off to
deac vate it.
Aspect Marker
Selects the aspect ra o of the marker.
You can select from among [Off], [16:9], [4:3],
[4:3 ON AIR], [15:9], [14:9], [13:9], [1.85:1],
[2.35:1], [2.39:1], [1.85:1 & 4:3], [1.66:1],
[1.896:1], [Variable].
*
Variable Aspect
Allows the user to select the aspect ra o from
the range between 1.00:1 and 3.00:1.
Center Marker
Selects On to display the center marker and Off
not to display it.
Area Marker
Selects the size of the area marker.
You can select from among [Off], [80%], [85%],
[88%], [90%], [93%], [100%], [EBU Ac on 16:9],
[EBU Graphic 16:9], [EBU Ac on 14:9],
[EBU Graphic 14:9], [EBU Ac on 4:3],
[EBU Graphic 4:3].
Color
Selects the color of the marker.
You can select from among [White], [Gray], [Red],
[Green], [Blue], [Yellow], [Cyan], [Magenta].
Aspect Mat
Darkens the outside of the area of the Aspect
Marker. You can select from 0 to 7.
Fit
With Fit On, the Area Marker is displayed rela ve
to the Aspect Marker in use.
With Fit Off, the Area Marker is displayed rela ve
to the incoming video source.
Thickness
Adjusts the thickness of the marker lines.
You can select it from 1 to 7.
Page 5/7
WFM/Vector
- Sets to ac vate and deac vate Waveform
monitor and Vectorscope.
You can select from among [WFM],
[VectorScope], [WFM+Vector], [WFM Wide].
*This func on doesn’t work when RGB format
signal is input.
* [WFM/Vector] func on works in SDI input only.
* [WFM Wide] func on doesn’t work in PBP Mode
Intensity
Adjusts the brightness of Waveform and
Vectorscope display.
You can select from 1 to 64.
Transparency
Adjusts the transparency level of Waveform and
Vectorscope.
[Black]: The background is black. Displayed image
is hidden behind the background.
[Half]: The background is transparent. Displayed
image can be seen indis nctly behind the
Waveform and Vectorscope display.
Color
Selects the color of Waveform monitor.
Available colors are [Green] and [White].
Line Select
Selects [On] to display the Waveform of the line
assigned in [Line Posi on] below.
*
Line Posi on
Selects the specific horizontal line for
Waveform and Vectorscope.
Increases the value to move the line upwards
and decreases the value to move the line
downwards.
User Configuration Menu
Posi on
Sets the posi on of Waveform and Vector Scope.
[Right Bo om], [Le Bo om], [Le Top],
[Right Top] can be selected.
** This func on doesn’t work in P&P mode.