OBM-P Series
17
True Dual Monitoring Solutions
Picture By Picture
User Configuration Menu
Page 3/7
Speaker Out / Audio Level Meter Se ng
- Selects the audio channel of the SDI & HDMI
input signal.
SDI : Le Speaker Out / Right Speaker Out
-
Selects the embedded audio channel for the
le and right audio out of the Headphone jack
on the front panel of the monitor.
Audio channel can be selected among Ch1 ~
Ch16, Analog.
HDMI : L/R Speaker Out
-
Selects the embedded audio channel of the
HDMI signal. The available models are [Off],
[HDMI On], [Analog On].
Audio Level Meter Se ng
Selects the embedded audio mode.
: [Off], [8Ch [G1+G2]], [8Ch [G2+G3]],
[8Ch [G3+G4]],
[8Ch [G1+G3]], [8Ch [G1+G4]], [8Ch [G2+G4]],
[16Ch [G1~G4]]
** In HDMI input, either [Off] or [HDMI 2Ch]
can be selected.
Display
Selects the display method for Audio Level Meter.
Available modes are [Group] and [Pair].
** In HDMI input, the mode is fixed to [Pair].
Reference
Selects the default value of Audio Level Meter.
Available op ons are [-18dB] and [-20dB].
Size/Transparency
Selects the size and transparency of Audio Level
Meter.
Available op ons are [Normal/Full],
[Normal/Half], [Large/Full], [Large/Half].
Peak Hold Time
Controls the speed rate of Peak Hold Decay
Time occurring when the audio volume decreases.
Input Se ng
3G Signal Format
- Selects the format of 3G SDI input signal.
: [Auto],[A 4:4:4 YUV 10b],[A 4:4:4 GBR 10b],
[A 4:4:4 YUV 12b],[A 4:4:4 GBR 12b],
[A 4:2:2 YUV 12b],[B DL 4:4:4 YUV 10/12b],
[B DL 4:4:4 GBR 10/12b],[B DL 4:2:2 YUV 12b],
[B DL 4:2:2 YUV 10b 60p]
RGB Range
- Selects Black Level and White Level of RGB format.
*Limited : 64(10bit)/256(12bit) ~
1023(10bit)/4095(12bit)
*Full: 0(Black Level) ~ 1023(10bit)/4095(12bit)
Page 2/7
P&P Se ng
P&P Mode Select
-Sets the mul display se ng
[Side-By-Side]: Two pictures are displayed side by side.
[Wipe] : Le and right pictures connected at the
boundary posi on are displayed.
** The boundary line of the le and right area is
changed with the [SELECT/VOLUME] knob.
[Blend] : The picture that superimposes two Input
signals is displayed.
Wipe Posi on
-Sets the posi on of the boundary line.
Set to 0 to 1920.
Blend Ra o
-Sets the blending ra o when images are mixed.
Set to 0 to 15.
**see “PBP Mode” (page 22).
