Rear Panel (OBM-U248K / U278K / U318K)
A : SDI IN (SDI Input) connectors (BNC)
Input connectors for SDI signals. For details. Connec ng the SDI Signals” (page 28).
B : SDI OUT (SDI Output) connectors (BNC)
Output connectors for SDI signals.
Each connector outputs the signal which is input to the corresponding SDI IN connector.
**Note
- Output is ac vated only when the power is on. Output is not ac vated in standby mode.
C : HDMI Input connector
Input connector for HDMI signals.
- For an HDMI cable, High Speed HDMI Cable with the cable type logo or HDMI 2.0 Cable is recommended.
- When inpu ng 4K resolu on(3840 x 2160 or 4096 x 2160) signal, use a cable of 3m or less.
D : SFP Input connector
Input connector for SFP op cal signal.
E : SERIAL REMOTE IN/OUT connector (RJ-45)
Used for the future func on expansion.
Connects the monitor to control the program provided by the manufacturer by using RS-422/485
communica on or the external UMD(IMD) equipment and controls the monitor.
D
A
I
B
C
G
F
E
H
J
OBM-8K Series
8K LCD Professional Monitor
12G-SDI Quad Link 8K
8
