Speaker Out / Audio Level Meter Se ng
- Selects the audio channel of the SDI & HDMI
input signal.
SDI : Le Speaker Out / Right Speaker Out
-
Selects the embedded audio channel for the
le and right audio out of the Headphone jack
on the front panel of the monitor.
Audio channel can be selected among Ch1 ~
Ch16, Analog.
HDMI : L/R Speaker Out
-
Selects the embedded audio channel of the
HDMI signal. The available modes are [Off],
[HDMI On], [Analog On].
Audio Level Meter
Selects the embedded audio mode.
: [Off], [8Ch [G1+G2]], [8Ch [G2+G3]],
[8Ch [G3+G4]],[8Ch [G1+G3]], [8Ch [G1+G4]],
[8Ch [G2+G4]],[16Ch [G1~G4]]
** In HDMI input, either [Off] or [HDMI 2Ch]
can be selected.
Display
Selects the display method for Audio Level Meter.
Available modes are [Group] and [Pair].
** In HDMI input, the mode is fixed to [Pair].
Reference
Selects the default value of Audio Level Meter.
Available op ons are [-18dB] and [-20dB].
Size/Transparency
Selects the size and transparency of Audio Level
Meter.
Available op ons are [Normal/Full],
[Normal/Half], [Large/Full], [Large/Half].
Peak Hold Time
Controls the speed rate of Peak Hold Decay
Time occurring when the audio volume decreases.
Marker Se ng
Marker
- Selects On to display the marker, and Off to
deac vate it.
Aspect Marker
Selects the aspect ra o of the marker.
You can select from among [Off], [16:9], [4:3],
[4:3 ON AIR], [15:9], [14:9], [13:9], [1.85:1],
[2.35:1], [2.39:1], [1.85:1 & 4:3], [1.66:1],
[1.896:1], [Variable], [Custom].
*
Variable Aspect
Allows the user to select the aspect ra o from
the range between 1.00:1 and 3.00:1.
Center Marker
Selects On to display the center marker and Off
not to display it.
Area Marker
Selects the size of the area marker.
You can select from among [Off], [80%], [85%],
[88%], [90%], [93%], [100%], [EBU Ac on 16:9],
[EBU Graphic 16:9], [EBU Ac on 14:9],
[EBU Graphic 14:9], [EBU Ac on 4:3],
[EBU Graphic 4:3].
Color
Selects the color of the marker.
You can select from among [White], [Gray], [Red],
[Green], [Blue], [Yellow], [Cyan], [Magenta].
Aspect Mat
Darkens the outside of the area of the Aspect
Marker. You can select from 0 to 7.
Fit
With Fit On, the Area Marker is displayed rela ve
to the Aspect Marker in use.
With Fit Off, the Area Marker is displayed rela ve
to the incoming video source.
Thickness
Adjusts the thickness of the marker lines.
You can select it from 1 to 7.
User Configura on Menu
Page 3/7
Page 4/7
OBM-8K Series
8K LCD Professional Monitor
12G-SDI Quad Link 8K
21
