Postium OBM-8K Series, Инструкции по эксплуатации

Страница: 6 / 42

3. Location and Function of Parts and Controls
Front Panel (OBM-U248K/278K/318K)
A B C D E F G
A : Input select Bu ons/Lamp
Press to monitor the signal input to each connector.
[SINGLE] Bu on/Lamp
- Press the bu on to select SDI input or SFP input for one channel.
- Mode changes in the order of [12G SDI-1], [12G SDI-2], [3G SDI-3], [3G SDI-4], [SFP]*.([SFP-1],[SFP-2]*)
*SFP input is set deac vated in the default se ng. Change the menu se ng to ac vate SFP input.
MENU > User Configura on > [2/7] > SFP Enable > Enable
**Note
How to make a quick input change: When you push [SINGLE] bu on and the current
input indicator is displayed, turn the [SELECT/VOLUME] knob to select another input
and push the knob, then you can go to another input directly.
[2-S.I.] Bu on/Lamp
- Press the bu on to select 2-Sample Interleave SDI input signal through two or four
SDI input connectors.
- Mode changes in the order of [Dual-Link 2-S.I.], [Quad-Link 2-S.I.].[Dual-Link 2-S.I.(SFP)*]
[SQUARE] Bu on/Lamp - Press the bu on to select [Quad-Link Square Division] mode.
[HDMI] Bu on/Lamp - Press the bu on to select HDMI input.
B : F1 ~ F5 Bu on/Lamp
Press to adjust or turn on/off the assigned func on.
The following func ons are assigned at the factory.
[F1]: Color Temp
[F2]: Audio Level Meter
[F3]: Time Code
[F4]: Zebra & False Color
[F5]: Focus Assist
C : Func on Bu on/Lamp
Press to adjust or turn/off each func on.
[SCAN] Bu on - Press the bu on to adjust the scan mode. (Zero Scan, 1:1 Scan).
[ASPECT] Bu on
- Press the bu on to select the Aspect Ra o of the signal.
- Mode changes in the order of [16:9], [4:3], [2.35:1] ,[1.85:1], [15:9], [16:10], [AUTO].
[MARKER] Bu on - Press the bu on to ac vate and deac vate the Marker.
[BLUE ONLY] Bu on
- Press the bu on to ac vate and deac vate the Blue Only func on.
- You may remove R(red) and G(green) from the input signal and display the screen only with B(blue) signal.
This func on is convenient to adjust Chroma and Phase and to observe the signal noise.
- The bu on may be pressed twice to change the screen to MONO mode.
(This mode uses only Luminance value.)
[KEY LOCK] Bu on - Press the bu on to lock all bu ons except Power/Menu.
OBM-8K Series
8K LCD Professional Monitor
12G-SDI Quad Link 8K
6