Possl D-Line 2011 Скачать руководство пользователя

Страница: 92 / 118

Motorhome - 02/11-0 - PSL-MJ11-00EN

Sanitary fittings

Fill the water tank with fresh water. Use a water hose, a water canister with
a funnel or similar for filling.

Close the fresh water filler neck.

Screw the cap back onto the water tank.

Draining water:

Unscrew the cap (Fig. 94,2) on the water tank.

Remove the stopper (Fig. 94,1) from the drainage opening. The water
drains off.

Screw the cap back onto the water tank.

11.2.1

20 l maximum filling

In order to reach the permissible payload the water tank can be drained down
to 20 litres.

Location

The drain screw of the 20 l maximum filling is located at the bottom of the water
tank.

Draining water:

Open the drain screw (Fig. 95,1). The fresh water is drained down to
20 litres.

Close the drain screw (Fig. 95,1).

11.3

Waste water tank

The waste water tank is located under the vehicle floor.

The drain cock and the cleaning opening are located at the bottom of the
waste water tank.

Volume

Depending on the model the waste water tank holds approx. 90 l or approx.
100 l.

Cleaning

Clean the waste water tank several times per year (see Chapter 12).

Fig. 95

20 l maximum filling

In case of frost add so much anti-freeze (e.g. kitchen salt) to the waste
water tank so that the waste water cannot freeze.

Never pour boiling water directly into the sink outlet. Boiling water could
cause deformation and leaks in the waste water pipe system.

Only empty the waste water tank at disposal stations, at camping sites or
caravan sites, that are especially provided for this purpose.

Содержание D-Line 2011























































































































Результаты поиска

Содержание D-Line 2011

Отзывы:

Похожие инструкции для D-Line 2011

Бренды по названию

Популярные бренды

Possl D-Line 2011, Инструкция по эксплуатации

Результаты поиска

Содержание D-Line 2011

Отзывы:

Похожие инструкции для D-Line 2011

Бренды по названию

Популярные бренды