Possl D-Line 2011 Скачать руководство пользователя

Страница: 28 / 118

Motorhome - 02/11-0 - PSL-MJ11-00EN

During the journey

Adjusting the seat height

Depending on the model, the height of the seat is infinitely adjustable.

Pull the lever (Fig. 3,1) upwards.

Take pressure off or apply pressure to seat. The seat moves up or down.

Release lever when the desired position is reached. The seat is locked.

5.4.2

Seats (ISRI)

Rotating seats into

driving position

The seats can be rotated in any direction. The seats can only be locked in posi-
tion in the direction of travel.

Push both armrests upward.

Push the driver's seat/front passenger's seat backwards or into the central
position.

Rotate the seat in the direction of travel and lock in position.

Adjusting the armrest

The height of the armrests is infinitely adjustable.

For ease in handling, first move the armrest slightly upward.

For fine adjustments, turn the handwheel (Fig. 4,1) upwards or downwards.

Fig. 3

Seat height adjustment

Fig. 4

Driver's and front passenger's
seats (ISRI)

Armrest adjustment

Lengthways adjustment

Height adjustment

Rotating

Backrest adjustment

Rotating the seats in the stationary vehicle is described in Chapter 7.

Содержание D-Line 2011























































































































Результаты поиска

Содержание D-Line 2011

Отзывы:

Похожие инструкции для D-Line 2011

Бренды по названию

Популярные бренды

Possl D-Line 2011, Инструкция по эксплуатации

Результаты поиска

Содержание D-Line 2011

Отзывы:

Похожие инструкции для D-Line 2011

Бренды по названию

Популярные бренды