Possl D-Line 2011 Скачать руководство пользователя

Страница: 84 / 118

Motorhome - 02/11-0 - PSL-MJ11-00EN

Appliances

10.4

Gas cooker

Never let gas escape unburned due to danger of explosion.

Before using the cooker make sure that there is sufficient ventilation.
Open windows or the skylight.

Do not use gas cooker or gas oven for heating.

Always protect your hands with cooking gloves or potholders when han-
dling hot pots, pans and similar items. There is a risk of injury!

During activation and operation of the gas cooker, no flammable or
easily combustible objects such as dishcloths, napkins etc. may be near
the gas cooker. Fire hazard!

The process of ignition must be visible from above and must not be cov-
ered by cooking pans placed on the cooker.

Depending on the model, the gas cooker lid is held closed by a spring.
When closing there is danger of getting injured!

Do not use the glass gas cooker lid as a hob.

Do not close the gas cooker lid while the gas cooker is in operation.

Do not apply pressure on the gas cooker lid when it is closed.

Do not place hot cooking pans on the gas cooker lid.

Keep the gas cooker lid open after cooking as long as the burner emits
heat. The glass plate could otherwise burst.

Use only pots and pans whose diameter is suitable for the burner grates of
the gas cooker.

When the flame fades, the thermocouple automatically cuts the gas supply.

Further information can be obtained from the separate instruction manual
"Gas cooker".

Содержание D-Line 2011























































































































Результаты поиска

Содержание D-Line 2011

Отзывы:

Похожие инструкции для D-Line 2011

Бренды по названию

Популярные бренды

Possl D-Line 2011, Инструкция по эксплуатации

Результаты поиска

Содержание D-Line 2011

Отзывы:

Похожие инструкции для D-Line 2011

Бренды по названию

Популярные бренды