Specific Adjustments
Add-on Waiting Time:
This setting is
only used for reading WPC
symbologies with Add-on, such as
EAN and UPC. The WPC must be
decoded first, then Add-on. But
Add-on may not decode very well
during it read. Therefore, scanner
offer a waiting time for reading Add-on
confirmation and transmits WPC with
Add-on at the same time.
Doubble Confirm Times:
If it is
enabled, the scanner will require
many times successful decoding to
confirm the barcode data. More
confirm times more inhibitive
miss-reading code. This feature should be depended on the
symbology and quality of barcodes reading. Selecting a higher
value will reduce read-out speed.
Public Min. / Max. Length:
Public Minimum and Maximum length
can be set to qualify data entry. They are effect all symbologies if
their Min./Max. Code Length is zero. The length is defined to the
actual barcode data length sent. Label with length exceeds these
limits will be rejected. Make sure that the Minimum length setting is
no greater than the Maximum length setting, or all the labels of the
symboblogy will not be read. In particular, you can set the same
value for both Minimum and Maximum reading length to force the
fixed length barcode decoded. The values of setting are no effect in
some fixed length symbobolgies (i.e. UPC and EAN call WPC).
Addon-Waiting Time
BAK
*BAK*
(Range:01
10
-99
10
Unit:10ms)
Double Confirm Times
BAJ
*BAJ*
(Range:01
10
-99
10
)
Public Min. Length
BAA
*BAA*
(Range:01
10
-56
10
)
Public Max. Length
BAB
*BAB*
(Range:04
10
-56
10
)
EXIT
System
Control
*/$%END*
25
System Control
3
