POSline ITT4300, Руководство пользователя

Страница: 36 / 46

POSline ITT4300 Label Printer
6
B. Problems on ribbon
Blinking Indicators READYand MEDIA
LCD display MEDIA OUT
Possible Problems Solutions Remarks
Ribbons has run out Supply the ribbon roll Does not apply to
direct thermal.
If you use direct
thermal, set bit 1 of
DIP switch to OFF.
Ribbon jam Recover the jam not for direct thermal.
Ribbon sensor error Replace the ribbon
sensor not for direct thermal.
C.Other Problems
Blinking Indicators READY
LCD display Possible Problems and Solutions Remarks
SERIAL IO
ERROR . Inconsistent baud rate, format or
protocol between host and printer
. Check bits 6 ~ 8 of DIP switch
Refer to section 2 for DIP switch. Not for
Centronics
MEMORY FULL . . Check the graphics and soft
fonts fromhost.
. Make sure to delete the graphics
and soft fonts if they are no longer
used by the application software.
Note: After the problems have been solved, press CANCEL to continue
printing.