POSline ITT4300, Руководство пользователя, Страница: 18 / 46

POSline ITT4300 Label Printer
6
Buttons
There are three buttons, each having two basic functions.
Button Under normal condition Pressed the button
and turn on the power
simultaneously
FEED Feeds a label. Performs a self test
and a configuration
report will be printed.
PAUSE
•
Stops the printing
process.
•
Resume the printing
after press it again.
Perform the media
calibration.
CANCEL Interrupts and deletes the
printing task.
Forces the printer to
continue working after an
error had been solved. Resets the settings at
E
2
PROM.
Notes:
1. We suggest you make “media calibration “.
- after the first time installation
- after change different type or size of media
2. After calibration the printer will save the related parameters (reflection
characteristics, label length, etc.) to E
2
PROM. Without correct calibration
the gap detection is easily lost during printing especially for small labels
(less than 1.5 inches in height).
3. Before calibration, the media and ribbon must be loaded properly and
move the label sensor to correct position.
4. After self-test, the printer is at dump mode, If you need normal
operation, you must press CANCEL to restart the printer.