POSline ITT4300, Руководство пользователя, Страница: 22 / 46

POSline ITT4300 Label Printer
6
Resetting the Printer to Factory
Default Settings
If you would like to reset the printer to its factory defaults after certain
commands have been sent or settings changed:
1. Turn off the printer. Press and hold the CANCEL button.
2. Turn on the power.
3. When the message “E2PROM RESET …” is displayed on the LCD
and READY indicator blinks, release the button.
4. Finally the “READY” message is displayed and the READY
indicator stops blinking and lights up.
5. The following parameters automatically reset.
- Label parameters
- Heat (Darkness)
- Speed
- Symbol set (language)
- Others for specific emulation
Notes :
1. All settings stored in non-volatile E
2
PROM cannot be destroyed even
by turning the printer off.
2. The settings of DIP switch can not be reset.
3. It is necessary to perform label sensitivity calibration after resetting.
4. The printed label count can not be reset.