BRX Power Injector Installation Guide
11
180-0192-001-R01
3.1.2 Local 110-220Vac Source
The BRX-PWR-xx-AC family integrates a 110-220Vac to -48Vdc power supply. The devices ship with
a pre-installed 10 feet (3 meters) unterminated AC power cord to connect a nearby AC power source.
Figure 6: AC cable pre-installed and terminated in the BRX Power Injector
Here is the procedure to follow should you need to install a longer AC power cord.
Step 1
: You will need a set of pliers to splice the AC
cable and attach a grounding lug to the green wire.
Step 2
: Use the plier to attach the grounding lug to
the green wire
The AC power cable is pre-
terminated into the AC-DC power
supply and the Grounding wire
(green) is attached to the
grounding Lug
