Positive posture CAFE+, Руководство пользователя

Страница: 21 / 28

20
OPERATION & USE
20 20
TO AVOID INJURY
Always check your surroundings before using your chair to ensure that no people, pets, or objects will be hit or squeezed
by the reclining back or footrest.
TO AVOID DAMAGE AND INJURY
•
This chair is meant to be used for indoor household use only. The chair is not designed for
commercial purposes.
•
If you use the chair in a cold room, do not increase the temperature abruptly. Instead, increase the temperature
gradually to a normal level.
•
If the chair is stored in a cold place and is moved into a warm environment, wait one hour before use. Otherwise,
performance may suffer, or the chair may malfunction.
•
Do not sit on the chair with the footrest raised. Sudden heavy weight on the footrest could cause damage to the
chair, or it may result in accident or injury.
CAUTION
WARNING
Positioning Yourself in the Recliner & Customizing Your Comfort
For maximum seating comfort and maximum support, slide all the way back into the recliner and lean against the backrest
before reclining.
•
ADJUSTING THE HEADREST SUPPORT ANGLE: While seated, reach up with both hands and grasp both sides of the
headrest around the frame. Be sure you reach high enough to reach beyond the padded back - you should feel the rigid
frame beneath the upholstery. Grasp the frame and tilt the headers forward (or push it back) until you Find Your Comfort™.
The headrest will remain fixed in a position until you adjust it again.
•
ADJUSTING THE CERVICAL NECK SUPPORT: Your True Zero Gravity recliner comes with a cervical neck pillow that drapes
over the top of the backrest. When sitting in the recliner, slide this pillow up or down to Find Your Comfort™.
•
ADJUSTING THE LUMBAR SUPPORT: Your True Zero Gravity recliner is designed to accept an accessory lumbar support.
Where the backrest upholstery meets the seat, you’ll notice that you can lift the back pad up off the backrest. When you
do this you will see an accessory lumbar support which can be adjusted to sit higher or lower to support the small of your
back. Just pull it off the Velcro strips and reattach in your desired location. The support may also be removed by users who
prefer less support in the low back.