16
ASSEMBLY
Step 1
Thread the two cords with small connectors from
backrest and connect with the corresponding connectors
in the seat base.
Step 3
Insert and tighten the 4 bolts with washers as shown.
Use an allen wrench (included) to fully tighten.
Step 2
Lift and hold back in place aligning thread holes on the
base and recliner back. Be careful not to place tension
on the power cord you connected in Step 1.
Step 4
Lift back cushion and tuck flaps with Velcro between
back and base. Pull tight before adhering.
Assembling the Chair
•
To prevent disconnection, be sure to double check all connections by gently pulling on the electrical connectors.
CAUTION
