5.
Position the terminal in
Low Profile mode
. While setting up the
terminal in low profile mode, ensure that the terminal is placed high
enough so that the screen would not hit the table surface.
5.1
While keeping your terminal steady
with your hand holding on to the
base stand, tilt your terminal down.
5.2
Support the screen with one hand holding onto its bottom edge.
Then, while pulling the lever backwards, move the display upwards
or downwards until the lever is snapped into the upper hook to
lower the screen as shown in the below figure.
5.3
Push the cable cover back.
5.4
Tilt the screen up or down to your
desired angle. Please do not press on
the LCD panel while setting up the
tilt angle.
Lever
Upper
hook
10
