POSIFLEX PP-8900 Скачать руководство пользователя

Страница: 8 / 16

Restore LAN Information to Factory Default via LAN Info Reset

Among multiple built-in functions,

LAN Info Reset

mainly allows you to

reset LAN information to factory default. The following steps are provided to
help you complete the reset process.

Power OFF

printer.

Open the cover of the printer.

Press

Feed

button five times after powering on the printer.

Close the cover of the printer.

The printer will emit one long beep sound and then print a test
page displaying LAN interface information.

Afterwards, the printer will restart by itself.

Ensure that LAN information is correctly set to factory default
as follows:

LAN Interface Information for Factory Default

IP Address

192.168.192.168

MAC Address (*)

00.19.17.00.02.03

NETMASK

255.255.255.0

GATEWAY

192.168.192.1

LINK STATUS(*)

DISCONNECT

FIRMWARE VERSION(*)

1.1.2

Note:

Values of the Items marked with an asterisk (*) are

reserved and not allowed to be changed.

Содержание PP-8900

















Результаты поиска

Содержание PP-8900

Отзывы:

Похожие инструкции для PP-8900

Бренды по названию

Популярные бренды

POSIFLEX PP-8900, Руководство пользователя

Результаты поиска

Содержание PP-8900

Отзывы:

Похожие инструкции для PP-8900

Бренды по названию

Популярные бренды