Part 7
Please note the importance of keeping the leftward pressure on bottom end of
pole display during the process of turning the pole upright and inserting the
locating bosses
B’
or even when you want to release the locating bosses
B’
away from I/O plate
B
and turn the upper end of pole display to left to remove
the locking lugs
A’
from bottom chassis
A
. Ignorance of this point may
damage or even break off the locking lugs
A’
due to improper torque applied.
Apply sidewall screw
The screw bosses of PD-2601 base should
now align with the screw holes on sidewall
of system chassis. Only 1 screw needs to be
applied. Use the self-tapping screw that
comes with PD-2601 to fix from external
side of sidewall as demonstrated in
Pix. 6
.
Connect interface cable
Carefully close back the top cover of HT or PB system and connect the
interface cable of PD-2601 to appropriate port in system connector area. Then
close the back cover of the system.
INSTALLING PD-2602
Opening the rear connect cover on system
To install PD-2602 to the base of KS or TP systems, the rear connect cover on
its base has to be removed as described in the user’s
manual. The plastic hook
plate to remove the rear
connect cover in slim base is
indicated in
Pix. 7
and that for
universal base is indicated in
Pix. 8
.
A’
Pix. 5
B+B’
B+B’
Outside of sidewall
PD-2601 Base
Pix. 6
C+C’
Pix. 8
Pix. 7