Part 6
Refer to the bottom view picture of the separated
base, pass all cable through the cable tunnel as
hollow arrowed with cable tie from the cable
passage to the main unit in left picture.
Hook the main unit back onto base stand assembly by matching the matching
pegs to round part of matching holes and slide them down to slot part till the
rear lock/release button clicks.
Connect the VGA cable, USB cable (type B connector) and power cable to the
I/O connection area of LM-8115 / TM-8115. Connect up to 2 USB devices to
LM-8115 / TM-8115 at the type A connectors. Please note that unlike usual
USB HUB, these USB devices won’t be recognized by the host when LM-
8115 / TM-8115 are powered off.
Step A:
Prepare a soft clean flat surface, such
as a piece of cloth on the desk to seat
the front surface of main unit.
Step C:
Slide the base stand assembly to separate
the main unit from base stand
A
C
B
Step B:
Press the Lock/Release button for
main unit detach and meantime ...
Matching Holes
Matching Pegs
Round Part
Slot Part
Cable Passage
