Part 13
horizontal size, phase, horizontal position, vertical position and exit.
“AUTO GEOMETRY ADJUST”:
Upon an “OSD” button press
on this icon the monitor will perform an automatic geometry adjustment
and exits the OSD window leaving 2 icons below at center of the screen.
Press “NXT” button to switch the selection. Press “OSD” button to
make the choice.
“ACCEPT”:
Accept the adjustment setting.
“REJECT”:
Decline the adjustment setting and return to
previous setting.
“HORIZONTAL SIZE”:
When this item is selected, there will
be only the horizontal size icon with an adjustment indication bar under
it between the main menu area and the video signal mode. Press “+”
button to increase horizontal size. Press “-” to decrease. Press “OSD”
button to save the current setting and return to “Geometry adjust
submenu”.
“PHASE”:
When this item is selected, there will be only the
phase adjust icon with an adjustment indication bar under it between
the main menu area and the video signal mode. Press “+” or “-” button
to adjust the pixel synchronization phase for best picture display. Press
“OSD” button to save the current setting and return to “Geometry
adjust submenu”.
“HORIZONTAL POSITION”:
When this item is selected, there
will be only the horizontal position icon with an adjustment indication
bar under it between the main menu area and the video signal mode.
Press “+” or “-” button to shift the screen display to right or left. Press
“OSD” button to save the current setting and return to “Geometry
adjust submenu”.
“VERTICAL POSITION”:
When this item is selected, there
will be only the vertical position icon with an adjustment indication bar
under it between the main menu area and the video signal mode. Press
“+” button to shift up the screen display. Press “-” to shift down. Press
“OSD” button to save the current setting and return to “Geometry
adjust submenu”.
“EXIT”:
Return to “Main menu”.
“TOOLS SUBMENU”:
When this item is selected, there are 5 icons
in this submenu:
Press “OSD” button to select item or
return to main menu. Press “NXT” button to select among OSD submenu,
reset to default, phase, smoothness / sharpness adjust, mode select and exit.
“OSD SUBMENU”:
When this item is selected, there are 4 icons
in this submenu:
Press “OSD” button to select item
or return to main menu. Press “NXT” button to select among OSD time,
