3
back of the panel unit. For LM6101, please arrange the power to be supplied
through the interface cable from the main unit and just connect the video
interface cable. Connect the other end of VGA cable to the appropriate VGA
port. The monitor will always turn ON whenever power is made available.
5. Adjust for best viewing tilt angle and engage the on screen display (OSD)
adjustment for best display effect whenever necessary. The monitor will sign
for “No Signal” status and go into power saving mode in 5 seconds when
there is no video signal. The display will come back when the signal does.
V. OSD
A. OSD buttons
“OSD” button
: To enter OSD setup menu, or to perform function selected
in OSD operation.
“NXT” button
: To go to next option function.
“
”
“
” button
: To increase setting.
“
”
“
” button
: To decrease setting.
“
” “
” button
: To turn the monitor power ON/OFF. The monitor can be
turned OFF only when there is video signal and can be turned ON only
when there is video signal and after the “Turn Off Panel” message
VGA Connector
Power Connector in VGA Cable
Power Connector from Power Adaptor
for LM6112
