Part 12
Now, turn the adjustable stand assembly back to normal orientation
and arrange all cables to come out of the area for mounting main unit from the
bottom edge for ease of later operation.
PREPARING THE MAIN UNIT
On the back of the main unit, there is a service window among the 4
matching pegs. Remove the service window lock screw to find several jumpers.
The jumpers in this window are designated for VGA port and COM port power
supply function. Please consult your dealer for technical support on setup of
these jumpers. Please note that only those qualified
technicians may adjust in the service window with
information from Posiflex and the contents in the
service window may change without notice as time
develops.
SIDE MOUNT UPGRADE KIT
Remove the 2 circled screws in last picture above
to remove the cover for side mount upgrade kit. Take out
the cable inside this cover as circled in right picture and
remove the 2 shorting jumpers inside and then connect it to
connector inside the side mount upgrade kit like SD400 as
arrowed in same picture. Gently arrange the excessive
length of this cable back in the hole and screw-fit it back to
the position originally occupied by the cover. Please reserve the cover if there
is chance to have the side mount kit removed in the future.
DESKTOP MOUNTING
KS6115:258~355
Match the matching pegs on the back of the main unit against the
matching holes on the stand assembly. First aim the matching pegs toward the
upper round part of the hole and make sure that all pegs are inside the holes.
Matching Holes
Matching Pegs
Round Part
Slot Part
Service Window
Lock Screw
Jumpers
